- A desktop precision force tester.
- Most suitable for connector evaluation test.
- Force minimum display 0.001 N (when 5N load cell is used).
- Display of displacement 0.001 mm.
- Most suitable for testing small (miniature) parts.
- Capable of switch feeling test also.
Examples of use
- Switch feeling test (when optional CF card V-103A is used)
- Electronic device properties evaluation test
- Connector evaluation test
- Bending test at preset displacement
Specifications
|
MODEL-1605VCL |
Max. force |
500N(50kgf) |
Force accuracy |
Depends on the load cell used. |
Force measuring amplifier |
MODEL-1016C |
Controller |
Built in |
Test speed |
0.5~600mm/min |
Speed changing |
15 steps or stepless |
Stroke |
250 mm; when linear gage is used, 30 mm |
Distance between test center and column |
100mm |
Table size |
W475×D150mm M10×1.5 |
Drive motor |
Servo motor |
Detector |
Rotary encoder/linear gage selection |
Display resolution |
Rotary encoder 0.01 mm, linear gage 0.001 mm |
Dimensions |
W480×H882×D375mm |
Stand mass |
Approx. 45 kg |
Amplifier mass |
Approx. 44 kg |
Power supply |
Single phase, 100 VAC – 240 VAC, 5A |
Standard set |
Tester, force measuring amplifier MODEL-1016C, load cell 1 piece, linear gage |
Options |
Additional load cell, jig/fixture, software, CF card for switch feeling test:V-103A / for creep test V-115A, ON/OFF detector Model 0219 |
Document download and related products
External View(PDF)
Force measuring amplifier MODEL-1016C Load cell
Accessory/Jig Software FS-700