Precision force tester MODEL-1605VCL

  • A desktop precision force tester.
  • Most suitable for connector evaluation test.
  • Force minimum display 0.001 N (when 5N load cell is used).
  • Display of displacement 0.001 mm.
  • Most suitable for testing small (miniature) parts.
  • Capable of switch feeling test also.

Examples of use

  • Switch feeling test (when optional CF card V-103A is used)
  • Electronic device properties evaluation test
  • Connector evaluation test
  • Bending test at preset displacement

Specifications

MODEL-1605VCL
Max. force 500N(50kgf)
Force accuracy Depends on the load cell used.
Force measuring amplifier MODEL-1016C
Controller Built in
Test speed 0.5~600mm/min
Speed changing 15 steps or stepless
Stroke 250 mm; when linear gage is used, 30 mm
Distance between test center and column 100mm
Table size W475×D150mm M10×1.5
Drive motor Servo motor
Detector Rotary encoder/linear gage selection
Display resolution Rotary encoder 0.01 mm, linear gage 0.001 mm
Dimensions W480×H882×D375mm
Stand mass Approx. 45 kg
Amplifier mass Approx. 44 kg
Power supply Single phase, 100 VAC – 240 VAC, 5A
Standard set Tester, force measuring amplifier MODEL-1016C, load cell 1 piece, linear gage
Options Additional load cell, jig/fixture, software, CF card for switch feeling test:V-103A / for creep test V-115A, ON/OFF detector Model 0219

Document download and related products

External View(PDF)

Force measuring amplifier MODEL-1016C Load cell

Accessory/Jig Software FS-700