- A horizontal type force tester.
- Suitable for testing small workpieces since workpieces can be set easily.
- Options available for die shear test of boards, electronic devices, etc.
Examples of use
- Die shear test
- Connector strength test
Specifications
|
MODEL-2152KE |
| Max. force |
500N（50kgf） |
| Force accuracy |
Depends on the load cell used. |
| Force measuring amplifier |
MODEL-1018 |
| Controller |
Built in |
| Test speed |
10～80mm/min |
| Speed changing |
5 steps or stepless |
| Stroke |
150mm |
| Distance between test center and column |
77.5～117.5mm |
| Table size |
W100×D100mm |
| Drive motor |
DC brushless motor |
| Detector |
Rotary encoder, resolution 0.01 mm |
| Display accuracy |
0.1mm |
| Dimensions |
W518×H314×D345mm |
| Stand mass |
Approx. 23 kg |
| Amplifier mass |
Approx. 5.2kg |
| Power supply |
Single phase, 100 VAC – 240 VAC, 0.5A |
| Standard set |
Tester, force measuring amplifier MODEL-1018, load cell 1 piece |
| Options |
Additional load cell, jig/fixture, software |
Document download and related products
External View(PDF)
Force measuring amplifier MODEL-1018
Load cell Accessory／Jig
Software FS-800 Software FSN-850
