- Capable of handling forces up to 1 kN.
- Stroke as large as 400 mm.
Examples of use
- Tensile & compression tests
- 3-point bending test
- Joint strength test
- Pull-out & peeling test
Specifications
| MODEL-1308U | |
| Max. force | 1kN（100kgf） |
| Controller | Built in |
| Test speed | 5～100mm/min |
| Speed changing | Variable resistor |
| Stroke | 400mm |
| Distance between test center and column | 60mm |
| Table size | W250×D140mm |
| Drive motor | DC brushless motor |
| Dimensions | W255×H810×D300mm |
| Stand mass | Approx. 28Kg |
| Power supply | Single phase 100 – 240 VAC, 0.5 A |
| Options | Force gauge jig/fixture cable jig mounting plate OJ-P-90 (for tensile test) |
