Digital force gage

SX Series

The sales will end on December 2017. The equipment to replace are RZ Series.

・Easy-to-read large display and display reversing function.
・Auto power off and auto zero reset functions.
・Printer output and overload output provided as standard features.
・Power supply: Nickel-metal hydride battery.
・Dedicated AC adapter included as a standard accessory.
(100 – 240 V/European spec. plug)
・Charging time: Approx. 4.5 hours.
・Usable time: Approx. 35 hours after full charge.
・CE marking obtained.

Digital force gage-SX Series

Examples of use

Measurement of operating force
(Switch, lever, door, drawer)
Measurement of strength
Measurement of peeling force

ex_rx_02 ex_rx_01


Model SX-2 SX-5 SX-20 SX-50
Max. force 20N
Min. display unit 0.01N/0.001Kgf/1gf 0.1N/0.01Kgf
Measurement Unit N or (gf)kgf, N , lb selectable
Accuracy ±0.2%F.S.
Sampling cycle 50 ms (16 ms, 5 ms, 1.25 ms) selectable
Display update interval 1, 2, 5, 10, 20 times/sec. selectable
Display LCD, signed, 5 digits, 40 × 40 mm
Output Printer output
Overload output
Mass Approx. 360g
Power supply Nickel-metal hydride battery, AC adapter Model 770 (100VAC - 240VAC)
Standard accessories Standard accessories
Options Test Stand,
Sanei thermal printer,
Overload cable SX-OP-1,
Printer & External input cable SX-OP-2

SX Series and RZ Series Comparison Table

ModelSX SeriesRZ Series
Measurement unitKgf (gf)/N/lb selectableKgf/N/lb selectable
Measurement itemTrack/Peak/+Peak/-PeakTrack/Peak
Usable timeApprox. 35 hoursApprox. 30 hours
Display update interval1, 2, 5, 10, 20 times/sec.
1, 2, 5, 10, 20 times/sec.
Sampling cycle1.25 ms, 5 ms, 16 ms and 50 ms selectable1 ms, 5 ms, 16 ms, 50 ms, 125 ms and 250 ms selectable
Analog output×
USB data output×
Printer output
Overload output
Comparator setting×
External contact hold input
External print input×
Main body caseAluminum die castingABS resin